Instructions

Installation Guide - wall decal

Wall decal installation guide

Wall decals are designed to quickly personalize a wall, a piece of furniture or a decorative space. For a successful installation, apply them to a clean, smooth and dry surface.

Gradually peel off the decal, position it carefully, then smooth the surface to remove any air bubbles. For large formats, work in pairs and proceed slowly to maintain alignment.

Shop: wall decals · bedroom wall decor · children's room

Decals are a practical solution for creating a feature wall, decorating a child's room or personalizing a commercial space without painting.

Required materials

Clean, damp cloth
Masking tape
Scissors

Adequate surfaces

Smooth, dry, and clean surface, covered with one coat of primer and one or two coats of paint.

Please wait a minimum of 15 days before installing on a freshly painted surface.

Surfaces to avoid

Dirty, moldy or dusty surface

Textured, damaged or peeling surface

*it is not recommended to install directly on brick, wood, drywall, primer or plaster

No transfer paper

Icon to view the installation video for stickers without transfer paper

Watch our installation video

Watch the video

1. Prepare the surface

Clean the surface with a slightly damp cloth and let it dry. Do not use cleaning products.

2. Apply

Peel off each piece and apply them to the wall to achieve the desired result.

With transfer paper

Watch our installation video

Watch the video

1. Prepare the surface

Clean the surface with a slightly damp cloth and allow to dry. Do not use cleaning products.

2. Cut out

On the sheet containing all the designs, cut out each sticker individually.

3. Take off

Carefully peel off the white backing film, ensuring the sticker remains firmly attached to the transfer paper. The adhesive side is now exposed.

4. Apply

Apply the adhesive surface of the sticker directly to the wall. Press and smooth firmly with your hands (the heat from your hands will activate the adhesive).